收藏本站
Evaluation Board User Guide
IC FUNCTIONS
Table 4 explains the function of each IC on the evaluation
board. The Lattice CPLD (U2) is only used for routing signals
on the board and performs no decoding or signal conditioning.
Table 4. IC Functions
Reference
Designator Function
U1 ADAU1401A SigmaDSP audio processor
U2 Lattice M4A3-64/32 CPLD for signal routing
UG-072
RESET
The evaluation board can be reset with a push-button switch,
S1. This active-low reset signal is debounced by the ADM811
(U10). This reset signal affects the ADAU1401A and S/PDIF
receiver and transmitter. The board may also be reset by
disconnecting the power. After reset, the ADAU1401A does not
pass audio, and a control port write has to be performed so that
signals are output again.
SELF-BOOT
U3
U4
U5
U6
U8
U10
U11
U12
U14
U18
U19
U20
AD8608 quad op amp for analog audio output
buffering
CS8416 S/PDIF receiver
74LVC541 for buffering serial output signals
CS8406 S/PDIF transmitter
ADP3336-3 regulator—3.3 V analog supply
ADM811RART reset generator
Unused
74LVC1G240 inverter
Self-boot EEPROM: 32 kB × 8 (256 kB)
Unused
Unused
Unused
The self-boot function of the ADAU1401A can be set up on the
evaluation board. This allows the ADAU1401A to boot itself
from EEPROM U14 when it is brought out of reset. The
ADAU1401A is the master on the I 2 C bus during the self-boot
operation; however, another bus master device may take control
afterwards.
The first step in setting up self-boot mode is to load a program
from SigmaStudio into the EEPROM. This is done by using the
Load latest compilation to EEPROM function found by right-
clicking on the IC in the Hardware Configuration window.
This should be done while the S3-1 self-boot switch is set low
(right). Note that the jumper should not be on LK7 for this
operation because the EEPROM cannot be write-protected.
LED FUNCTIONS
D11 indicates that the 3.3 V supply is present through an
After the program is saved, Switch S3-1 can be set high (left),
which sets the ADAU1401A into self-boot mode the next time
it is powered on or reset.
external supply.
Rev. A | Page 7 of 20
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
EVAL-ADCMP564BRQZ BOARD EVALUATION ADCMP564BRQZ
EVAL-ADE7169EBZ-2 BOARD EVALUATION FOR ADE7169F16
EVAL-ADE7751ZEB BOARD EVALUATION FOR ADE7751
EVAL-ADE7752AEBZ BOARD EVALUATION FOR ADE7752A
EVAL-ADE7753ZEB BOARD EVALUATION AD7753
EVAL-ADE7754EBZ BOARD EVALAUTION FOR ADE7754
EVAL-ADE7755ZEB BOARD EVALUATION FOR AD7755
EVAL-ADE7758ZEB BOARD EVAL FOR AD7758
相关代理商/技术参数
EVAL-ADAU1401EB 制造商:AD 制造商全称:Analog Devices 功能描述:SigmaDSP 28-/56-Bit Audio Processor with Two ADCs and Four DACs
EVAL-ADAU1401EBZ 功能描述:BOARD EVAL FOR ADAU1401 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:SigmaDSP® 标准包装:1 系列:PCI Express® (PCIe) 主要目的:接口，收发器，PCI Express 嵌入式:- 已用 IC / 零件:DS80PCI800 主要属性:- 次要属性:- 已供物品:板
EVAL-ADAU1401-EBZ 制造商:Analog Devices 功能描述:EVALUATION KIT ((NS))
EVAL-ADAU1442EBZ 功能描述:BOARD EVAL FOR ADAU1442 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:SigmaDSP® 标准包装:1 系列:PCI Express® (PCIe) 主要目的:接口，收发器，PCI Express 嵌入式:- 已用 IC / 零件:DS80PCI800 主要属性:- 次要属性:- 已供物品:板
EVAL-ADAU1446EBZ 功能描述:BOARD EVAL FOR ADAU1446 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:SigmaDSP® 标准包装:1 系列:PCI Express® (PCIe) 主要目的:接口，收发器，PCI Express 嵌入式:- 已用 IC / 零件:DS80PCI800 主要属性:- 次要属性:- 已供物品:板
EVAL-ADAU1590EBZ 制造商:Analog Devices 功能描述:EVAL BOARD - Bulk
EVAL-ADAU1592EBZ 制造商:Analog Devices 功能描述:Evaluation Board For ADAU1592 制造商:Analog Devices 功能描述:EVAL BOARD - Boxed Product (Development Kits)
EVAL-ADAU1701EB 制造商:Analog Devices 功能描述:EVAL BOARD FOR SIGMADSP AUDIO PROCESSOR - Bulk